Hyundai Santa Fe wheels
Bolt pattern, centre bore, ET offset and factory tyre sizes for the Hyundai Santa Fe, generation by generation. Use the table when choosing wheels — the sets currently for sale that fit are listed below.
The Hyundai Santa Fe uses a 5x114.3 bolt pattern, a 67.1 mm centre bore, and R16, R17, R18, R19 wheels.
| Generation | Bolt pattern | Centre bore | ET | Fitting diameters | Factory tyre sizes |
|---|---|---|---|---|---|
| SM (1st gen)2000–2006 | 5x114.3 | 67.1 mm | 38–50 | R16 | 225/70 R16 |
| CM (2nd gen)2006–2012 | 5x114.3 | 67.1 mm | 38–50 | R16, R17, R18 | 235/70 R16, 235/65 R17, 235/60 R18 |
| DM (3rd gen)2012–2018 | 5x114.3 | 67.1 mm | 35–50 | R17, R18, R19 | 235/65 R17, 235/60 R18, 235/55 R19 |
| TM (4th gen)2018–2023 | 5x114.3 | 67.1 mm | 35–50 | R17, R18, R19 | 235/65 R17, 235/60 R18, 235/55 R19 |
- SM (1st gen): Standard 6.5Jx16 ET46 across petrol and CRDi versions.
This data is a reference — trims and markets vary. Check your vehicle documents or your existing rims before buying.
Wheels that fit the Hyundai Santa Fe (0)
No listings match your search.
Selling your wheels?
List them free — Hyundai Santa Fe owners find this page through Google.
Post adFrequently asked questions
What is the Hyundai Santa Fe bolt pattern?
Hyundai Santa Fe bolt pattern by generation: SM (1st gen) (2000–2006) 5x114.3; CM (2nd gen) (2006–2012) 5x114.3; DM (3rd gen) (2012–2018) 5x114.3; TM (4th gen) (2018–2023) 5x114.3. Check against your old wheels or the vehicle documents before buying.
What is the Hyundai Santa Fe centre bore?
Hyundai Santa Fe centre bore (DIA) by generation: SM (1st gen) 67.1 mm; CM (2nd gen) 67.1 mm; DM (3rd gen) 67.1 mm; TM (4th gen) 67.1 mm. If the wheel's bore is larger than the car's hub you will need spigot rings; a smaller bore will not fit.
Can I fit wheels of a different diameter?
Yes, as long as the overall wheel diameter stays the same — a larger rim is offset by a lower-profile tyre. The table lists the diameters used on this model.