Hyundai i30 wheels
Bolt pattern, centre bore, ET offset and factory tyre sizes for the Hyundai i30, generation by generation. Use the table when choosing wheels — the sets currently for sale that fit are listed below.
The Hyundai i30 uses a 5x114.3 bolt pattern, a 67.1 mm centre bore, and R15, R16, R17, R18 wheels.
| Generation | Bolt pattern | Centre bore | ET | Fitting diameters | Factory tyre sizes |
|---|---|---|---|---|---|
| FD (1st gen)2007–2012 | 5x114.3 | 67.1 mm | 40–52 | R15, R16, R17 | 195/65 R15, 205/55 R16, 225/45 R17 |
| GD (2nd gen)2012–2017 | 5x114.3 | 67.1 mm | 40–52 | R15, R16, R17 | 195/65 R15, 205/55 R16, 225/45 R17 |
| PD (3rd gen)2017–present | 5x114.3 | 67.1 mm | 40–52 | R16, R17, R18 | 205/55 R16, 225/45 R17, 225/40 R18 |
- FD (1st gen): Hatch, CW estate and coupe all share 5x114.3 / 67.1. OEM offset is typically ET46-49.
- PD (3rd gen): i30 N uses 19in (235/35 R19) but the same 5x114.3 / 67.1 hub.
This data is a reference — trims and markets vary. Check your vehicle documents or your existing rims before buying.
Wheels that fit the Hyundai i30 (0)
No listings match your search.
Selling your wheels?
List them free — Hyundai i30 owners find this page through Google.
Post adFrequently asked questions
What is the Hyundai i30 bolt pattern?
Hyundai i30 bolt pattern by generation: FD (1st gen) (2007–2012) 5x114.3; GD (2nd gen) (2012–2017) 5x114.3; PD (3rd gen) (2017–present) 5x114.3. Check against your old wheels or the vehicle documents before buying.
What is the Hyundai i30 centre bore?
Hyundai i30 centre bore (DIA) by generation: FD (1st gen) 67.1 mm; GD (2nd gen) 67.1 mm; PD (3rd gen) 67.1 mm. If the wheel's bore is larger than the car's hub you will need spigot rings; a smaller bore will not fit.
Can I fit wheels of a different diameter?
Yes, as long as the overall wheel diameter stays the same — a larger rim is offset by a lower-profile tyre. The table lists the diameters used on this model.