Volvo V70 wheels
Bolt pattern, centre bore, ET offset and factory tyre sizes for the Volvo V70, generation by generation. Use the table when choosing wheels — the sets currently for sale that fit are listed below.
The Volvo V70 uses a 5x108 bolt pattern, a 65.1 / 63.4 mm centre bore, and R15, R16, R17, R18, R19 wheels.
| Generation | Bolt pattern | Centre bore | ET | Fitting diameters | Factory tyre sizes |
|---|---|---|---|---|---|
| V70 I (P80)1996–2000 | 5x108 | 65.1 mm | 38–45 | R15, R16, R17 | 195/60 R15, 205/55 R16 |
| V70 II (P2)2000–2007 | 5x108 | 65.1 mm | 40–50 | R15, R16, R17, R18 | 195/65 R15, 215/55 R16, 225/45 R17, 235/45 R17 |
| V70 III (P3)2007–2016 | 5x108 | 63.4 mm | 45–55 | R16, R17, R18, R19 | 205/60 R16, 215/55 R16, 225/50 R17, 235/45 R18 |
- V70 I (P80): Shares wheels with 850 and S70. 65.1 mm bore — later 63.4 mm Volvo wheels will not seat on this hub.
- V70 II (P2): P2 hub bore is 65.1 mm; P3 (2007+) wheels are 63.4 mm and will not fit.
- V70 III (P3): 63.4 mm bore. Older 65.1 mm P2 wheels need a 65.1→63.4 spigot ring.
This data is a reference — trims and markets vary. Check your vehicle documents or your existing rims before buying.
Wheels that fit the Volvo V70 (0)
No listings match your search.
Selling your wheels?
List them free — Volvo V70 owners find this page through Google.
Post adFrequently asked questions
What is the Volvo V70 bolt pattern?
Volvo V70 bolt pattern by generation: V70 I (P80) (1996–2000) 5x108; V70 II (P2) (2000–2007) 5x108; V70 III (P3) (2007–2016) 5x108. Check against your old wheels or the vehicle documents before buying.
What is the Volvo V70 centre bore?
Volvo V70 centre bore (DIA) by generation: V70 I (P80) 65.1 mm; V70 II (P2) 65.1 mm; V70 III (P3) 63.4 mm. If the wheel's bore is larger than the car's hub you will need spigot rings; a smaller bore will not fit.
Can I fit wheels of a different diameter?
Yes, as long as the overall wheel diameter stays the same — a larger rim is offset by a lower-profile tyre. The table lists the diameters used on this model.