Mercedes-Benz S klasė wheels
Bolt pattern, centre bore, ET offset and factory tyre sizes for the Mercedes-Benz S klasė, generation by generation. Use the table when choosing wheels — the sets currently for sale that fit are listed below.
The Mercedes-Benz S klasė uses a 5x112 bolt pattern, a 66.6 mm centre bore, and R16, R17, R18, R19, R20 wheels.
| Generation | Bolt pattern | Centre bore | ET | Fitting diameters | Factory tyre sizes |
|---|---|---|---|---|---|
| W2201998–2005 | 5x112 | 66.6 mm | 35–46 | R16, R17, R18 | 225/60 R16, 225/55 R17, 245/45 R18 |
| W2212005–2013 | 5x112 | 66.6 mm | 35–50 | R17, R18, R19, R20 | 235/55 R17, 255/45 R18 |
| W2222013–2020 | 5x112 | 66.6 mm | 35–50 | R18, R19, R20 | 245/50 R18, 245/45 R19 |
- W220: S500/S600 run staggered 18" — front and rear widths differ.
- W221: AMG and Sport packages use staggered 19"–20" sets.
- W222: AMG-line fitments are staggered; confirm the rear width before buying a square set.
This data is a reference — trims and markets vary. Check your vehicle documents or your existing rims before buying.
Wheels that fit the Mercedes-Benz S klasė (0)
No listings match your search.
Selling your wheels?
List them free — Mercedes-Benz S klasė owners find this page through Google.
Post adFrequently asked questions
What is the Mercedes-Benz S klasė bolt pattern?
Mercedes-Benz S klasė bolt pattern by generation: W220 (1998–2005) 5x112; W221 (2005–2013) 5x112; W222 (2013–2020) 5x112. Check against your old wheels or the vehicle documents before buying.
What is the Mercedes-Benz S klasė centre bore?
Mercedes-Benz S klasė centre bore (DIA) by generation: W220 66.6 mm; W221 66.6 mm; W222 66.6 mm. If the wheel's bore is larger than the car's hub you will need spigot rings; a smaller bore will not fit.
Can I fit wheels of a different diameter?
Yes, as long as the overall wheel diameter stays the same — a larger rim is offset by a lower-profile tyre. The table lists the diameters used on this model.